McCrossens Cleaning Log

This is to certify that these draft lines are cleaned by Final Draught

DateNameMethod
8/13/24Natealkaline/pump
9/24/2024Nate Schlitzeralkaline/pump

§ 5.51. CLEANING OF MALT OR BREWED BEVERAGE DISPENSING SYSTEMS.

(b) The method of cleaning must leave the entire malt or brewed beverage dispensing system in a clean and sanitary condition. The cleaning method used must include cleaning the entire system with a chemical cleaning solution or other cleaning method approved by the Board. The following alternative cleaning methods have

Board approval:

(1) Live steam.
(2) Hot water and soda solution, followed by thorough rinsing with hot water.

(c) The frequency of cleaning for the malt or brewed beverage dispensing system shall be as follows:

(1) Once every 14 days for the faucets.
(2) Once every 14 days for the dispensing lines, valves, joints, couplers, hose fittings, washers, o-rings, empty beer detectors (known as ‘‘FOBS’’) and draft foam control units, except if the licensee has an operating ultrasonic, electromagnetic or other system that retards the growth of yeast and bacteria in the dispensing lines. If such a system is installed and operating, the licensee shall follow the cleaning frequency and cleaning method guidelines of the system’s manufacturer.